Syllabus Of Engineering Drawing II | Subject Code: ME 451 | BCT | IOE | + DOWNLOAD in PDF

Bachelor's Degree in Engineering | IOE "Syllabus of Engineering Drawing II | Sub. Code: ME 451 | BCT

Check and download syllabus of Engineering Drawing II - Subject code: ME 451 | BCT | IOE | TU

Check All Syllabus Here:

Syllabus Of Bachelor's Degree Of Engineering (B.E.) :: IOE | TU

Download PDF File | Syllabus of Engineering Drawing II (BCT) | Subject Code: ME 451 | IOE

Engineering Drawing II (ME 451)
First Year First Part (Year:I, Part:II)
Lecture: 1
Tutorial: 0
Practical: 3

Course Objectives:

To make familiar with the conventional practices of sectional views. To develop basic concept and skill of pictorial drawing and working drawings. Also to make familiar with standard symbols of different engineering fields.

1. Conventional Practices for Orthographlc and Sectional Views (12 hours)

• 1.1 Conventional Practices in Orthographic views: Half Views and Partial Views, Treatment of Unimportant Intersections, Aligned Views, Treatment for Radially Arranged Features, Representation of Fillets and Rounds
• 1.2 Conventional Practices in Sectional views: Conventions for Ribs, Webs and Spokeq in Sectional View, Broken Section, Removed Section, Revolved Section, Of{set Section, Phantom Section and Auxiliary Sectional Views
• 1.3 Simplified Representations ef Standard Machine Elements

2. Pictorial Drawlngs (20 hours)

• 2.1 Classifications: Advantages and Disadvantages
• 2.2 Axonometric Projection: Isometric Projection and Isomelric Drawing
• 2.2.1 Procedure for making an isometric drawing
• 2.2.2 Isometric and Non-isometric Lines; Isometric and Non-isometric Surfaces
• 2.2.3 Angles in Isometric Drawing
• 2.2.4 Circles and Circular,Arcs in lsometric Drawing
• 2.2.5 lrregulqr Curves in lsometric Drawing
• 2.2.6 Isometric sectional Views
• 2.3 Oblique Projection and Oblique Drawing
• 2.3.1 Procedure for mqking an Oblique drawing
• 2.3.2 Rules for Placing Objeas in Oblique drawing
• 2.3.3 Angles, Circles and Circular Arcs in Oblique drawing
• 2.4 PerspectiveProjection
• 2.4.1 Terms used in Perspective Prorection
• 2.4.2 Parallel and Angular Perspective
• 2.4.3 Selection of Station Point

3. Familiarization with Different Components and Conventions (8 hours)

• 3.1 Limit Dimensioning and Machining Symbols
• 3.1.1 Limit, Fit and Tolerances
• 3.1.2 Machining Symbols and Surface Finish
• 3.2 Threads, Bolts and Nuts
• 3.2.1 Thread Terms and Nomenclature, Forms of Screw Threads
• 3.2.2 Detailed and Simplified Representation of Internal and External Threads
• 3.2.3 Thread Dimensioning
• 3.2.4 Standard Bolts and Nuts: Hexagonal Head and Square Head
• 3.2.5 Conventional Symbols for Bolts and Nuts
• 3.3 Welding and Riveting
• 3.3.1 Types of Welded Joints and Types of Welds, Welding Symbols
• 3.3.2 Forms and Proportions for Rivet Heads, Rivet Symbols, Types of Riveted Joints: Lap Joint, Butt Joint 
• 3.4 Familiarization with Graphical Symbols and Conventions in Different Engineering Fields
• 3.4.1 Standard Symbols for Civil, Structural and Agricultural Components
• 3.4.2 Standard Symbols for Electrical, Mechanical and Industrial Components
• 3.4.3 Standard Symbols tor Electronics, Communication and Computer Components
• 3.4.4 Topographical Symbols
• 3.5 Standard Piping Symbols and Piping Drawing

4. Detail and Assembly Drawings (20 hours)

• 4.1 lntroduction to Working Drawing
• 4.2 Components of Working Drawing: Drawing Layout, Bili of Materials, Drawing Numbers
• 4.3 Detail Drawing
• 4.4 Assembly Drawing
• 4.5 Practices of Detail and Assembly Drawing: V-block Clamp, Centering Cone, Couplings, Bearings, Antivibration Mounts, Stuffing Boxes, Screw Jacks, etc

Practical:

1. Conventional Practices for Orthographic and Sectional Vielvs (Full and Half Section)
2. Conventional Practices for Orthographic and Sectional Viars (Othet Type Sections)
3. lsometric Drawing
4. lsometric Drawing (Consisting of Curved Surfaces and Sections)
5. Oblique Drawing
6. PerspectiveProjection
7. Familiarization with Graphical Symbols (Limit, Fit, Tolerances and Surface Roughness Symbols)
8. Familiarization with'Graphical Symbols (Symbols for Different Engineerins Fields)
9. Detail Drawing
10. Assembly Drawing I
11. Assembly Drawing II
12. Building Drawing

Reference Books:

1. W. J. Luzadder, " Fundamentals of Engineering Drawing', Prentice Hall.
2. T. E. French, C. J. Vierck, and R. J. Foster, "Engineering Drawing and Graphic Technology', Mc Graw Hill Publishing Co.
3. F. E. Giescke, A . Mitchell, H. C. Spencer and J. T. Dygdone, "Technical Drawing", Macmillan Publishing Co.
4. N. D. Bhatt, 'Machine Drawing', Charotar Publshing House, India.
5. P. S. Gill, "Machine Drawing", S. K. Kataria and Sons, India.
6. R. K. Dhawan "Machine Drawing', S. Chand and Company Limited, India.